1. Since the thermal conductivity of stainless steel is small, the heat dissipation at the bottom is slow, and the temperature is easy to concentrate. Therefore, the firepower should not be too large when using kitchen kitchenware. The bottom heating surface should be as wide and uniform as possible so as to save fuel and avoid burning of food at the bottom of the pan.

2. If there is food on the bottom is scorch, it can be softened with water and then scraped off with bamboo and wood chips. It can be scraped without a sharp knife . After washing, use a soft cloth and dry it.

3. Kitchenware should avoid collision touch with sharp objects, so as to avoid scratches affecting the appearance and sealing performance.

4. After the kitchen kitchenware have been used for a period of time, the surface of the stainless steel will have a mist, which will make the surface of the kitchenware dark. At this time, use a soft cloth to clean or use detergent ,it will restore the light. This method can also be used if the outer surface is blackened by smoke.

5. When using a stainless steel pot, do not allow water stains on the bottom of the pot. Especially when used on a coal ball stove, due to the briquettes contain sulfur, sulfur dioxide and sulfur trioxide are generated during combustion. When it encounters water, it generates sulfurous acid and sulfuric acid, which corrodes the bottom of the pot.

Kitchenware, like other metal kitchen utensils, tends to turn black when heated. To avoid this reaction, it is very important to treat the surface for the new kitchen kitchenware. Just smear a small amount of grease, such as peanut oil or animal oil. Before cooking the food, heating for a while, after the oily anti-oxidation film formed on the kitchenware, use it as you like. If there is no burning pan, it will not turn black again. If the kitchen kitchenware have turned black, and want to make it shine as early as possible, as long as the use of the commercially available "electroplating rust enhancer" for maintenance can remove rust and increase light. "Electroplating rust and glazing enhancer" is safe to use, does not damage the plating surface, and is non-toxic and tasteless.